PRO-Line Demand Heater Modules
Industrial and commercial instantaneous demand-type water heaters are available in a wide range of capacities and configurations from Spartan Manufacturing Corporation. All heaters are custom specified to meet the requirements of each specific application and are manufactured using standard heating components from our hot pressure cleaning systems.
Instantaneous demand water heaters have no water storage capacity. Demand heaters heat the water instantaneously and continuously as the water flows through the heater coil. The demand heater is automatically turned on and off in response to water flow. Demand heaters are ideally suited for applications requiring large volumes of heated water that is impractical to store in the tank of a storage type heater or for situations requiring instant hot water on demand without the excess energy cost of maintaining preheated water in storage.
- Multiple choices of energy sources – natural gas, LP gas, kerosene, heating oil, diesel fuel and electrical power.
- Capacities from 3 GPM – 5 GPM (11.4 LPM – 18.9 LPM)-Larger flow rates are possible. Call for information.
- Temperature rises up to 250 ºF.
- Energy rating up to 1,000,000 BTU/Hr.
- Handle water pressures from 20 PSI to 4000 PSI (1.4 BAR – 275.7 BAR)
- Stationary and mobile configurations.
- Automatic controls for starting and stopping the heater.
- Thermostat control.
- Corrosion resistant carbon steel or stainless steel heat exchangers.
- Special control interfacing.
- Vertical heat exchangers.
- Heavy-duty industrial design for long life.
- Stainless Steel Heating Coils
- Jet Fuel Burners
- Special Exhaust Equipment for Negative Pressure Environments
See Product Options for more information.
Item | Flow Rate | Maximum Pressure | Heating Fuel / Energy Source | List Price |
---|---|---|---|---|
ProLine 5300-LP | 5 GPM 18.925 LPM |
3000 PSI 206.850 BAR |
Propane Fired | QUOTE |
ProLine 4300-OF | 4 GPM 15.140 LPM |
3000 PSI 206.850 BAR |
Kerosene/Diesel or Oil Fired | QUOTE |
ProLine 3100 –LP | 3 GPM 11.355 LPM |
1000 PSI 68.950 BAR |
Propane Fired | QUOTE |
ProLine 3250-LP | 3 GPM 11.355 LPM |
2500 PSI 172.380 BAR |
Propane Fired | QUOTE |
ProLine 5300-OF | 5 GPM 18.925 LPM |
3000 PSI 206.850 BAR |
Kerosene/Diesel or Oil Fired | QUOTE |
ProLine 5300-NG | 5 GPM 18.925 LPM |
3000 PSI 206.850 BAR |
Natural Gas Fired | QUOTE |
ProLine 5400-LP | 5 GPM 18.925 LPM |
4000 PSI 275.800 BAR |
Propane Fired | QUOTE |
ProLine 5400-OF | 5 GPM 18.925 LPM |
4000 PSI 275.800 BAR |
Kerosene/Diesel or Oil Fired | QUOTE |
Item # ProLine 5300-LP, PRO-Line Demand Heater Module
Industrial and commercial instantaneous demand-type water heaters are available in a wide range of capacities and configurations from Spartan Manufacturing Corporation. All heaters are custom specified to meet the requirements of each specific application and are manufactured using standard heating components from our hot pressure cleaning systems.
Instantaneous demand water heaters have no water storage capacity. Demand heaters heat the water instantaneously and continuously as the water flows through the heater coil. The demand heater is automatically turned on and off in response to water flow. Demand heaters are ideally suited for applications requiring large volumes of heated water that is impractical to store in the tank of a storage type heater or for situations requiring instant hot water on demand without the excess energy cost of maintaining preheated water in storage.
Standard Features:
- Multiple choices of energy sources – natural gas, LP gas, kerosene, heating oil, diesel fuel and electrical power.
- Capacities from 3 GPM – 5 GPM (11.4 LPM – 18.9 LPM)
- Temperature rises up to 250 ºF.
- Energy rating up to 1,000,000 BTU/Hr.
- Handle water pressures from 20 PSI to 4000 PSI (1.4 BAR – 275.7 BAR)
- Stationary and mobile configurations.
- Automatic controls for starting and stopping the heater.
- Thermostat control.
- Corrosion resistant carbon steel or stainless steel heat exchangers.
- Special control interfacing.
- Vertical heat exchangers.
- Heavy-duty industrial design for long life.
- For electric heated demand heater modules see Custom Designed Cleaning Systems
Options Available:
- Stainless Steel Heating Coils
- Jet Fuel Burners
- Special Exhaust Equipment for Negative Pressure Environments
- See Product Options for more information.
Specifications
Flow Rate
|
5 GPM 18.925 LPM |
Maximum Pressure
|
3000 PSI 206.850 BAR |
Voltage / Phase
|
120-230 V / 1 Ph |
Engine Type
|
Lp Gas Fired |
Cold or Hot/Steam
|
Hot Water/Steam |
Heating Fuel/Energy Source
|
Propane Fired |
Major Options
|
|
Notes
|
Heater Modules Available in Optional 3 Phase Configuration – Contact SMC |
Warranty
|
Certificate of Limited Warranty |
Item # ProLine 4300-OF, PRO-Line Demand Heater Module
Industrial and commercial instantaneous demand-type water heaters are available in a wide range of capacities and configurations from Spartan Manufacturing Corporation. All heaters are custom specified to meet the requirements of each specific application and are manufactured using standard heating components from our hot pressure cleaning systems.
Instantaneous demand water heaters have no water storage capacity. Demand heaters heat the water instantaneously and continuously as the water flows through the heater coil. The demand heater is automatically turned on and off in response to water flow. Demand heaters are ideally suited for applications requiring large volumes of heated water that is impractical to store in the tank of a storage type heater or for situations requiring instant hot water on demand without the excess energy cost of maintaining preheated water in storage.
Standard Features:
- Multiple choices of energy sources – natural gas, LP gas, kerosene, heating oil, diesel fuel and electrical power.
- Capacities from 3 GPM – 5 GPM (11.4 LPM – 18.9 LPM)
- Temperature rises up to 250 ºF.
- Energy rating up to 1,000,000 BTU/Hr.
- Handle water pressures from 20 PSI to 4000 PSI (1.4 BAR – 275.7 BAR)
- Stationary and mobile configurations.
- Automatic controls for starting and stopping the heater.
- Thermostat control.
- Corrosion resistant carbon steel or stainless steel heat exchangers.
- Special control interfacing.
- Vertical heat exchangers.
- Heavy-duty industrial design for long life.
- For electric heated demand heater modules see Custom Designed Cleaning Systems
Options Available:
- Stainless Steel Heating Coils
- Jet Fuel Burners
- Special Exhaust Equipment for Negative Pressure Environments
- See Product Options for more information.
Specifications
Flow Rate
|
4 GPM 15.140 LPM |
Maximum Pressure
|
3000 PSI 206.850 BAR |
Voltage / Phase
|
120-230 V / 1 Ph |
Engine Type
|
Oil Fired |
Cold or Hot/Steam
|
Hot Water/Steam |
Heating Fuel/Energy Source
|
Kerosene/Diesel or Oil Fired |
Major Options
|
|
Notes
|
Heater Modules Available in Optional 3 Phase Configuration – Contact SMC |
Warranty
|
Certificate of Limited Warranty |
Item # ProLine 3100 –LP, PRO-Line Demand Heater Module
Industrial and commercial instantaneous demand-type water heaters are available in a wide range of capacities and configurations from Spartan Manufacturing Corporation. All heaters are custom specified to meet the requirements of each specific application and are manufactured using standard heating components from our hot pressure cleaning systems.
Instantaneous demand water heaters have no water storage capacity. Demand heaters heat the water instantaneously and continuously as the water flows through the heater coil. The demand heater is automatically turned on and off in response to water flow. Demand heaters are ideally suited for applications requiring large volumes of heated water that is impractical to store in the tank of a storage type heater or for situations requiring instant hot water on demand without the excess energy cost of maintaining preheated water in storage.
Standard Features:
- Multiple choices of energy sources – natural gas, LP gas, kerosene, heating oil, diesel fuel and electrical power.
- Capacities from 3 GPM – 5 GPM (11.4 LPM – 18.9 LPM)
- Temperature rises up to 250 ºF.
- Energy rating up to 1,000,000 BTU/Hr.
- Handle water pressures from 20 PSI to 4000 PSI (1.4 BAR – 275.7 BAR)
- Stationary and mobile configurations.
- Automatic controls for starting and stopping the heater.
- Thermostat control.
- Corrosion resistant carbon steel or stainless steel heat exchangers.
- Special control interfacing.
- Vertical heat exchangers.
- Heavy-duty industrial design for long life.
- For electric heated demand heater modules see Custom Designed Cleaning Systems
Options Available:
- Stainless Steel Heating Coils
- Jet Fuel Burners
- Special Exhaust Equipment for Negative Pressure Environments
- See Product Options for more information.
Specifications
Flow Rate
|
3 GPM 11.355 LPM |
Maximum Pressure
|
1000 PSI 68.950 BAR |
Voltage / Phase
|
120-230 V / 1 Ph |
Engine Type
|
Lp Gas Fired |
Cold or Hot/Steam
|
Hot Water/Steam |
Heating Fuel/Energy Source
|
Propane Fired |
Major Options
|
|
Notes
|
Heater Modules Available in Optional 3 Phase Configuration – Contact SMC |
Warranty
|
Certificate of Limited Warranty |
Item # ProLine 3250-LP, PRO-Line Demand Heater Module
Industrial and commercial instantaneous demand-type water heaters are available in a wide range of capacities and configurations from Spartan Manufacturing Corporation. All heaters are custom specified to meet the requirements of each specific application and are manufactured using standard heating components from our hot pressure cleaning systems.
Instantaneous demand water heaters have no water storage capacity. Demand heaters heat the water instantaneously and continuously as the water flows through the heater coil. The demand heater is automatically turned on and off in response to water flow. Demand heaters are ideally suited for applications requiring large volumes of heated water that is impractical to store in the tank of a storage type heater or for situations requiring instant hot water on demand without the excess energy cost of maintaining preheated water in storage.
Standard Features:
- Multiple choices of energy sources – natural gas, LP gas, kerosene, heating oil, diesel fuel and electrical power.
- Capacities from 3 GPM – 5 GPM (11.4 LPM – 18.9 LPM)
- Temperature rises up to 250 ºF.
- Energy rating up to 1,000,000 BTU/Hr.
- Handle water pressures from 20 PSI to 4000 PSI (1.4 BAR – 275.7 BAR)
- Stationary and mobile configurations.
- Automatic controls for starting and stopping the heater.
- Thermostat control.
- Corrosion resistant carbon steel or stainless steel heat exchangers.
- Special control interfacing.
- Vertical heat exchangers.
- Heavy-duty industrial design for long life.
- For electric heated demand heater modules see Custom Designed Cleaning Systems
Options Available:
- Stainless Steel Heating Coils
- Jet Fuel Burners
- Special Exhaust Equipment for Negative Pressure Environments
- See Product Options for more information.
Specifications
Flow Rate
|
3 GPM 11.355 LPM |
Maximum Pressure
|
2500 PSI 172.380 BAR |
Voltage / Phase
|
120-230 V / 1 Ph |
Engine Type
|
Lp Gas Fired |
Cold or Hot/Steam
|
Hot Water/Steam |
Heating Fuel/Energy Source
|
Propane Fired |
Major Options
|
|
Notes
|
Heater Modules Available in Optional 3 Phase Configuration – Contact SMC |
Warranty
|
Certificate of Limited Warranty |
Item # ProLine 5300-OF, PRO-Line Demand Heater Module
Industrial and commercial instantaneous demand-type water heaters are available in a wide range of capacities and configurations from Spartan Manufacturing Corporation. All heaters are custom specified to meet the requirements of each specific application and are manufactured using standard heating components from our hot pressure cleaning systems.
Instantaneous demand water heaters have no water storage capacity. Demand heaters heat the water instantaneously and continuously as the water flows through the heater coil. The demand heater is automatically turned on and off in response to water flow. Demand heaters are ideally suited for applications requiring large volumes of heated water that is impractical to store in the tank of a storage type heater or for situations requiring instant hot water on demand without the excess energy cost of maintaining preheated water in storage.
Standard Features:
- Multiple choices of energy sources – natural gas, LP gas, kerosene, heating oil, diesel fuel and electrical power.
- Capacities from 3 GPM – 5 GPM (11.4 LPM – 18.9 LPM)
- Temperature rises up to 250 ºF.
- Energy rating up to 1,000,000 BTU/Hr.
- Handle water pressures from 20 PSI to 4000 PSI (1.4 BAR – 275.7 BAR)
- Stationary and mobile configurations.
- Automatic controls for starting and stopping the heater.
- Thermostat control.
- Corrosion resistant carbon steel or stainless steel heat exchangers.
- Special control interfacing.
- Vertical heat exchangers.
- Heavy-duty industrial design for long life.
- For electric heated demand heater modules see Custom Designed Cleaning Systems
Options Available:
- Stainless Steel Heating Coils
- Jet Fuel Burners
- Special Exhaust Equipment for Negative Pressure Environments
- See Product Options for more information.
Specifications
Flow Rate
|
5 GPM 18.925 LPM |
Maximum Pressure
|
3000 PSI 206.850 BAR |
Voltage / Phase
|
120-230 V / 1 Ph |
Engine Type
|
Oil Fired |
Cold or Hot/Steam
|
Hot Water/Steam |
Heating Fuel/Energy Source
|
Kerosene/Diesel or Oil Fired |
Major Options
|
|
Notes
|
Heater Modules Available in Optional 3 Phase Configuration – Contact SMC |
Warranty
|
Certificate of Limited Warranty |
Item # ProLine 5300-NG, PRO-Line Demand Heater Module
Industrial and commercial instantaneous demand-type water heaters are available in a wide range of capacities and configurations from Spartan Manufacturing Corporation. All heaters are custom specified to meet the requirements of each specific application and are manufactured using standard heating components from our hot pressure cleaning systems.
Instantaneous demand water heaters have no water storage capacity. Demand heaters heat the water instantaneously and continuously as the water flows through the heater coil. The demand heater is automatically turned on and off in response to water flow. Demand heaters are ideally suited for applications requiring large volumes of heated water that is impractical to store in the tank of a storage type heater or for situations requiring instant hot water on demand without the excess energy cost of maintaining preheated water in storage.
Standard Features:
- Multiple choices of energy sources – natural gas, LP gas, kerosene, heating oil, diesel fuel and electrical power.
- Capacities from 3 GPM – 5 GPM (11.4 LPM – 18.9 LPM)
- Temperature rises up to 250 ºF.
- Energy rating up to 1,000,000 BTU/Hr.
- Handle water pressures from 20 PSI to 4000 PSI (1.4 BAR – 275.7 BAR)
- Stationary and mobile configurations.
- Automatic controls for starting and stopping the heater.
- Thermostat control.
- Corrosion resistant carbon steel or stainless steel heat exchangers.
- Special control interfacing.
- Vertical heat exchangers.
- Heavy-duty industrial design for long life.
- For electric heated demand heater modules see Custom Designed Cleaning Systems
Options Available:
- Stainless Steel Heating Coils
- Jet Fuel Burners
- Special Exhaust Equipment for Negative Pressure Environments
- See Product Options for more information.
Specifications
Flow Rate
|
5 GPM 18.925 LPM |
Maximum Pressure
|
3000 PSI 206.850 BAR |
Voltage / Phase
|
120-230 V / 1 Ph |
Engine Type
|
Natural Gas Fired |
Cold or Hot/Steam
|
Hot Water/Steam |
Heating Fuel/Energy Source
|
Natural Gas Fired |
Major Options
|
|
Notes
|
Heater Modules Available in Optional 3 Phase Configuration – Contact SMC |
Warranty
|
Certificate of Limited Warranty |
Item # ProLine 5400-LP, PRO-Line Demand Heater Module
Industrial and commercial instantaneous demand-type water heaters are available in a wide range of capacities and configurations from Spartan Manufacturing Corporation. All heaters are custom specified to meet the requirements of each specific application and are manufactured using standard heating components from our hot pressure cleaning systems.
Instantaneous demand water heaters have no water storage capacity. Demand heaters heat the water instantaneously and continuously as the water flows through the heater coil. The demand heater is automatically turned on and off in response to water flow. Demand heaters are ideally suited for applications requiring large volumes of heated water that is impractical to store in the tank of a storage type heater or for situations requiring instant hot water on demand without the excess energy cost of maintaining preheated water in storage.
Standard Features:
- Multiple choices of energy sources – natural gas, LP gas, kerosene, heating oil, diesel fuel and electrical power.
- Capacities from 3 GPM – 5 GPM (11.4 LPM – 18.9 LPM)
- Temperature rises up to 250 ºF.
- Energy rating up to 1,000,000 BTU/Hr.
- Handle water pressures from 20 PSI to 4000 PSI (1.4 BAR – 275.7 BAR)
- Stationary and mobile configurations.
- Automatic controls for starting and stopping the heater.
- Thermostat control.
- Corrosion resistant carbon steel or stainless steel heat exchangers.
- Special control interfacing.
- Vertical heat exchangers.
- Heavy-duty industrial design for long life.
- For electric heated demand heater modules see Custom Designed Cleaning Systems
Options Available:
- Stainless Steel Heating Coils
- Jet Fuel Burners
- Special Exhaust Equipment for Negative Pressure Environments
- See Product Options for more information.
Specifications
Flow Rate
|
5 GPM 18.925 LPM |
Maximum Pressure
|
4000 PSI 275.800 BAR |
Voltage / Phase
|
120-230 V / 1 Ph |
Engine Type
|
Lp Gas Fired |
Cold or Hot/Steam
|
Hot Water/Steam |
Heating Fuel/Energy Source
|
Propane Fired |
Major Options
|
|
Notes
|
Heater Modules Available in Optional 3 Phase Configuration – Contact SMC |
Warranty
|
Certificate of Limited Warranty |
Item # ProLine 5400-OF, PRO-Line Demand Heater Module
Industrial and commercial instantaneous demand-type water heaters are available in a wide range of capacities and configurations from Spartan Manufacturing Corporation. All heaters are custom specified to meet the requirements of each specific application and are manufactured using standard heating components from our hot pressure cleaning systems.
Instantaneous demand water heaters have no water storage capacity. Demand heaters heat the water instantaneously and continuously as the water flows through the heater coil. The demand heater is automatically turned on and off in response to water flow. Demand heaters are ideally suited for applications requiring large volumes of heated water that is impractical to store in the tank of a storage type heater or for situations requiring instant hot water on demand without the excess energy cost of maintaining preheated water in storage.
Standard Features:
- Multiple choices of energy sources – natural gas, LP gas, kerosene, heating oil, diesel fuel and electrical power.
- Capacities from 3 GPM – 5 GPM (11.4 LPM – 18.9 LPM)
- Temperature rises up to 250 ºF.
- Energy rating up to 1,000,000 BTU/Hr.
- Handle water pressures from 20 PSI to 4000 PSI (1.4 BAR – 275.7 BAR)
- Stationary and mobile configurations.
- Automatic controls for starting and stopping the heater.
- Thermostat control.
- Corrosion resistant carbon steel or stainless steel heat exchangers.
- Special control interfacing.
- Vertical heat exchangers.
- Heavy-duty industrial design for long life.
- For electric heated demand heater modules see Custom Designed Cleaning Systems
Options Available:
- Stainless Steel Heating Coils
- Jet Fuel Burners
- Special Exhaust Equipment for Negative Pressure Environments
- See Product Options for more information.
Specifications
Flow Rate
|
5 GPM 18.925 LPM |
Maximum Pressure
|
4000 PSI 275.800 BAR |
Voltage / Phase
|
120-230 V / 1 Ph |
Engine Type
|
Oil Fired |
Cold or Hot/Steam
|
Hot Water/Steam |
Heating Fuel/Energy Source
|
Kerosene/Diesel or Oil Fired |
Major Options
|
|
Notes
|
Heater Modules Available in Optional 3 Phase Configuration – Contact SMC |
Warranty
|
Certificate of Limited Warranty |